Connection ¶

class Connection(TypedDict, closed=True):
    owner_account: NotRequired["capo_direct_connect.types.owner_account.OwnerAccount"]
    """<p>The ID of the Amazon Web Services account that owns the connection.</p>"""
    connection_id: NotRequired["capo_direct_connect.types.connection_id.ConnectionId"]
    """<p>The ID of the connection.</p>"""
    connection_name: NotRequired[
        "capo_direct_connect.types.connection_name.ConnectionName"
    ]
    """<p>The name of the connection.</p>"""
    connection_state: NotRequired[
        "capo_direct_connect.types.connection_state.ConnectionState"
    ]
    """<p>The state of the connection. The following are the possible values:</p> <ul> <li> <p> <code>ordering</code>: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.</p> </li> <li> <p> <code>requested</code>: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.</p> </li> <li> <p> <code>pending</code>: The connection has been approved and is being initialized.</p> </li> <li> <p> <code>available</code>: The network link is up and the connection is ready for use.</p> </li> <li> <p> <code>down</code>: The network link is down.</p> </li> <li> <p> <code>deleting</code>: The connection is being deleted.</p> </li> <li> <p> <code>deleted</code>: The connection has been deleted.</p> </li> <li> <p> <code>rejected</code>: A hosted connection in the <code>ordering</code> state enters the <code>rejected</code> state if it is deleted by the customer.</p> </li> <li> <p> <code>unknown</code>: The state of the connection is not available.</p> </li> </ul>"""
    region: NotRequired["capo_direct_connect.types.region.Region"]
    """<p>The Amazon Web Services Region where the connection is located.</p>"""
    location: NotRequired["capo_direct_connect.types.location_code.LocationCode"]
    """<p>The location of the connection.</p>"""
    bandwidth: NotRequired["capo_direct_connect.types.bandwidth.Bandwidth"]
    """<p>The bandwidth of the connection.</p>"""
    vlan: "capo_direct_connect.types.vlan.VLAN"
    """<p>The ID of the VLAN.</p>"""
    partner_name: NotRequired["capo_direct_connect.types.partner_name.PartnerName"]
    """<p>The name of the Direct Connect service provider associated with the connection.</p>"""
    loa_issue_time: NotRequired["capo_direct_connect.types.loa_issue_time.LoaIssueTime"]
    """<p>The time of the most recent call to <a>DescribeLoa</a> for this connection.</p>"""
    lag_id: NotRequired["capo_direct_connect.types.lag_id.LagId"]
    """<p>The ID of the LAG.</p>"""
    aws_device: NotRequired["capo_direct_connect.types.aws_device.AwsDevice"]
    """<p>The Direct Connect endpoint on which the physical connection terminates.</p>"""
    jumbo_frame_capable: NotRequired[
        "capo_direct_connect.types.jumbo_frame_capable.JumboFrameCapable"
    ]
    """<p>Indicates whether jumbo frames are supported.</p>"""
    aws_device_v2: NotRequired["capo_direct_connect.types.aws_device_v2.AwsDeviceV2"]
    """<p>The Direct Connect endpoint that terminates the physical connection.</p>"""
    aws_logical_device_id: NotRequired[
        "capo_direct_connect.types.aws_logical_device_id.AwsLogicalDeviceId"
    ]
    """<p>The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.</p>"""
    has_logical_redundancy: NotRequired[
        "capo_direct_connect.types.has_logical_redundancy.HasLogicalRedundancy"
    ]
    """<p>Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).</p>"""
    tags: NotRequired["capo_direct_connect.types.tag_list.TagList"]
    """<p>The tags associated with the connection.</p>"""
    provider_name: NotRequired["capo_direct_connect.types.provider_name.ProviderName"]
    """<p>The name of the service provider associated with the connection.</p>"""
    mac_sec_capable: NotRequired[
        "capo_direct_connect.types.mac_sec_capable.MacSecCapable"
    ]
    """<p>Indicates whether the connection supports MAC Security (MACsec).</p>"""
    port_encryption_status: NotRequired[
        "capo_direct_connect.types.port_encryption_status.PortEncryptionStatus"
    ]
    """<p>The MAC Security (MACsec) port link status of the connection.</p> <p>The valid values are <code>Encryption Up</code>, which means that there is an active Connection Key Name, or <code>Encryption Down</code>.</p>"""
    encryption_mode: NotRequired[
        "capo_direct_connect.types.encryption_mode.EncryptionMode"
    ]
    """<p>The MAC Security (MACsec) connection encryption mode.</p> <p>The valid values are <code>no_encrypt</code>, <code>should_encrypt</code>, and <code>must_encrypt</code>.</p>"""
    mac_sec_keys: NotRequired[
        "capo_direct_connect.types.mac_sec_key_list.MacSecKeyList"
    ]
    """<p>The MAC Security (MACsec) security keys associated with the connection.</p>"""
    rate_limiter_status: NotRequired[
        "capo_direct_connect.types.rate_limiter_status.RateLimiterStatus"
    ]
    """<p>The rate limiter status for the connection, including how many rate limiters are in use and the maximum allowed.</p>"""
    partner_interconnect_mac_sec_capable: NotRequired[
        "capo_direct_connect.types.partner_interconnect_mac_sec_capable.PartnerInterconnectMacSecCapable"
    ]
    """<p>Indicates whether the interconnect hosting this connection supports MAC Security (MACsec).</p>"""
    prefix_pool_size_ipv4: NotRequired[
        "capo_direct_connect.types.prefix_pool_size.PrefixPoolSize"
    ]
    """<p>The total number of inbound IPv4 route prefixes you can allocate across the virtual interfaces on the connection. Not applicable to hosted connections or interconnects.</p>"""
    prefix_pool_size_ipv6: NotRequired[
        "capo_direct_connect.types.prefix_pool_size.PrefixPoolSize"
    ]
    """<p>The total number of inbound IPv6 route prefixes you can allocate across the virtual interfaces on the connection. Not applicable to hosted connections or interconnects.</p>"""
    prefix_pool_unallocated_count_ipv4: NotRequired[
        "capo_direct_connect.types.prefix_pool_unallocated_count.PrefixPoolUnallocatedCount"
    ]
    """<p>The number of inbound IPv4 route prefixes in the connection prefix pool not yet allocated to a virtual interface. Not applicable to hosted connections or interconnects.</p>"""
    prefix_pool_unallocated_count_ipv6: NotRequired[
        "capo_direct_connect.types.prefix_pool_unallocated_count.PrefixPoolUnallocatedCount"
    ]
    """<p>The number of inbound IPv6 route prefixes in the connection prefix pool not yet allocated to a virtual interface. Not applicable to hosted connections or interconnects.</p>"""
    billing_mode: NotRequired["capo_direct_connect.types.billing_mode.BillingMode"]
    """<p>The billing mode of the connection.</p>"""