get_discovered_resource_counts `async` ¶

get_discovered_resource_counts(
    *,
    config_overrides: Optional[AsyncConfigServiceClientConfig] = None,
    resource_types: Optional[ResourceTypes] = None,
    limit: Optional[Limit] = None,
    next_token: Optional[NextToken] = None,
) -> GetDiscoveredResourceCountsResponse

Returns the resource types, the number of each resource type, and the total number of resources that Config is recording in this region for your Amazon Web Services account.

Example

Config is recording three resource types in the US East (Ohio) Region for your account: 25 EC2 instances, 20 IAM users, and 15 S3 buckets.
You make a call to the GetDiscoveredResourceCounts action and specify that you want all resource types.
Config returns the following:
- The resource types (EC2 instances, IAM users, and S3 buckets).
- The number of each resource type (25, 20, and 15).
- The total number of all resources (60).

The response is paginated. By default, Config lists 100 ResourceCount objects on each page. You can customize this number with the limit parameter. The response includes a nextToken string. To get the next page of results, run the request again and specify the string for the nextToken parameter.

If you make a call to the GetDiscoveredResourceCounts action, you might not immediately receive resource counts in the following situations:

You are a new Config customer.
You just enabled resource recording.

It might take a few minutes for Config to record and count your resources. Wait a few minutes and then retry the GetDiscoveredResourceCounts action.

Parameters:

resource_types (Optional[ResourceTypes], default: None ) –

The comma-separated list that specifies the resource types that you want Config to return (for example, "AWS::EC2::Instance", "AWS::IAM::User").

If a value for resourceTypes is not specified, Config returns all resource types that Config is recording in the region for your account.

If the configuration recorder is turned off, Config returns an empty list of ResourceCount objects. If the configuration recorder is not recording a specific resource type (for example, S3 buckets), that resource type is not returned in the list of ResourceCount objects.
limit (Optional[Limit], default: None ) –

The maximum number of ResourceCount objects returned on each page. The default is 100. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
next_token (Optional[NextToken], default: None ) –

The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.

Raises:

InvalidLimitException –

The specified limit is outside the allowable range.
InvalidNextTokenException –

The specified next token is not valid. Specify the nextToken string that was returned in the previous response to get the next page of results.
ValidationException –
The requested operation is not valid. You will see this exception if there are missing required fields or if the input value fails the validation.

For PutStoredQuery, one of the following errors:
- There are missing required fields.
- The input value fails the validation.
- You are trying to create more than 300 queries.
For DescribeConfigurationRecorders and DescribeConfigurationRecorderStatus, one of the following errors:
- You have specified more than one configuration recorder.
- You have provided a service principal for service-linked configuration recorder that is not valid.
For AssociateResourceTypes and DisassociateResourceTypes, one of the following errors:
- Your configuraiton recorder has a recording strategy that does not allow the association or disassociation of resource types.
- One or more of the specified resource types are already associated or disassociated with the configuration recorder.
- For service-linked configuration recorders, the configuration recorder does not record one or more of the specified resource types.
For DeleteServiceLinkedConfigurationRecorder, one of the following errors:
- You have provided both Arn and ServicePrincipal. Only one of Arn or ServicePrincipal can be specified.
- You have provided a service principal for service-linked configuration recorder that is not valid.
UnknownServiceError –

The service returned an error code this client does not model.

Source code in docs_src/capo_config_service/_services/async_config_service.py

async def get_discovered_resource_counts(
    self,
    *,
    config_overrides: Optional[AsyncConfigServiceClientConfig] = None,
    resource_types: Optional[
        "capo_config_service.types.resource_types.ResourceTypes"
    ] = None,
    limit: Optional["capo_config_service.types.limit.Limit"] = None,
    next_token: Optional["capo_config_service.types.next_token.NextToken"] = None,
) -> "capo_config_service.types.get_discovered_resource_counts_response.GetDiscoveredResourceCountsResponse":
    """<p>Returns the resource types, the number of each resource type, and the total number of resources that Config is recording in this region for your Amazon Web Services account. </p> <p class="title"> <b>Example</b> </p> <ol> <li> <p>Config is recording three resource types in the US East (Ohio) Region for your account: 25 EC2 instances, 20 IAM users, and 15 S3 buckets.</p> </li> <li> <p>You make a call to the <code>GetDiscoveredResourceCounts</code> action and specify that you want all resource types. </p> </li> <li> <p>Config returns the following:</p> <ul> <li> <p>The resource types (EC2 instances, IAM users, and S3 buckets).</p> </li> <li> <p>The number of each resource type (25, 20, and 15).</p> </li> <li> <p>The total number of all resources (60).</p> </li> </ul> </li> </ol> <p>The response is paginated. By default, Config lists 100 <a>ResourceCount</a> objects on each page. You can customize this number with the <code>limit</code> parameter. The response includes a <code>nextToken</code> string. To get the next page of results, run the request again and specify the string for the <code>nextToken</code> parameter.</p> <note> <p>If you make a call to the <a>GetDiscoveredResourceCounts</a> action, you might not immediately receive resource counts in the following situations:</p> <ul> <li> <p>You are a new Config customer.</p> </li> <li> <p>You just enabled resource recording.</p> </li> </ul> <p>It might take a few minutes for Config to record and count your resources. Wait a few minutes and then retry the <a>GetDiscoveredResourceCounts</a> action. </p> </note>

    Args:
        resource_types: <p>The comma-separated list that specifies the resource types that you want Config to return (for example, <code>"AWS::EC2::Instance"</code>, <code>"AWS::IAM::User"</code>).</p> <p>If a value for <code>resourceTypes</code> is not specified, Config returns all resource types that Config is recording in the region for your account.</p> <note> <p>If the configuration recorder is turned off, Config returns an empty list of <a>ResourceCount</a> objects. If the configuration recorder is not recording a specific resource type (for example, S3 buckets), that resource type is not returned in the list of <a>ResourceCount</a> objects.</p> </note>
        limit: <p>The maximum number of <a>ResourceCount</a> objects returned on each page. The default is 100. You cannot specify a number greater than 100. If you specify 0, Config uses the default.</p>
        next_token: <p>The <code>nextToken</code> string returned on a previous page that you use to get the next page of results in a paginated response.</p>

    Raises:
        capo_config_service.errors.invalid_limit_exception.InvalidLimitException: <p>The specified limit is outside the allowable range.</p>
        capo_config_service.errors.invalid_next_token_exception.InvalidNextTokenException: <p>The specified next token is not valid. Specify the <code>nextToken</code> string that was returned in the previous response to get the next page of results.</p>
        capo_config_service.errors.validation_exception.ValidationException: <p>The requested operation is not valid. You will see this exception if there are missing required fields or if the input value fails the validation.</p> <p>For <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_PutStoredQuery.html">PutStoredQuery</a>, one of the following errors:</p> <ul> <li> <p>There are missing required fields.</p> </li> <li> <p>The input value fails the validation.</p> </li> <li> <p>You are trying to create more than 300 queries.</p> </li> </ul> <p>For <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_DescribeConfigurationRecorders.html">DescribeConfigurationRecorders</a> and <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_DescribeConfigurationRecorderStatus.html">DescribeConfigurationRecorderStatus</a>, one of the following errors:</p> <ul> <li> <p>You have specified more than one configuration recorder.</p> </li> <li> <p>You have provided a service principal for service-linked configuration recorder that is not valid.</p> </li> </ul> <p>For <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_AssociateResourceTypes.html">AssociateResourceTypes</a> and <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_DisassociateResourceTypes.html">DisassociateResourceTypes</a>, one of the following errors:</p> <ul> <li> <p>Your configuraiton recorder has a recording strategy that does not allow the association or disassociation of resource types.</p> </li> <li> <p>One or more of the specified resource types are already associated or disassociated with the configuration recorder.</p> </li> <li> <p>For service-linked configuration recorders, the configuration recorder does not record one or more of the specified resource types.</p> </li> </ul> <p>For <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_DeleteServiceLinkedConfigurationRecorder.html">DeleteServiceLinkedConfigurationRecorder</a>, one of the following errors:</p> <ul> <li> <p>You have provided both <code>Arn</code> and <code>ServicePrincipal</code>. Only one of <code>Arn</code> or <code>ServicePrincipal</code> can be specified.</p> </li> <li> <p>You have provided a service principal for service-linked configuration recorder that is not valid.</p> </li> </ul>
        capo_config_service.errors.UnknownServiceError: The service returned an error code this client does not model.
    """

    async def _handler(
        req: "AsyncOperationRequest[capo_config_service.types.get_discovered_resource_counts_request.GetDiscoveredResourceCountsRequest]",
    ) -> AsyncOperationResponse[
        "capo_config_service.types.get_discovered_resource_counts_response.GetDiscoveredResourceCountsResponse"
    ]:
        import capo_config_service._operations.starling_dove_service.get_discovered_resource_counts

        (
            output,
            http_response,
        ) = await capo_config_service._operations.starling_dove_service.get_discovered_resource_counts.async_get_discovered_resource_counts(
            req.options, req.input
        )
        return AsyncOperationResponse(output=output, response=http_response)

    interceptors_, options_ = self.operation_options(
        config_overrides, OperationLogging("GetDiscoveredResourceCounts")
    )
    input_: capo_config_service.types.get_discovered_resource_counts_request.GetDiscoveredResourceCountsRequest = {}
    if resource_types is not None:
        input_["resource_types"] = resource_types
    if limit is not None:
        input_["limit"] = limit
    if next_token is not None:
        input_["next_token"] = next_token

    response = await aexecute_pipeline(
        AsyncOperationRequest(input=input_, options=options_),
        handler=_handler,
        interceptors=list(interceptors_),
    )
    await response.response.aclose()
    return response.output

get_discovered_resource_counts async ¶

get_discovered_resource_counts `async` ¶