restore_db_cluster_to_point_in_time async ¶

async def restore_db_cluster_to_point_in_time(
    self,
    *,
    config_overrides: Optional[AsyncDocDBClientConfig] = None,
    db_cluster_identifier: Optional["capo_docdb.types.string.String"] = None,
    restore_type: Optional["capo_docdb.types.string.String"] = None,
    source_db_cluster_identifier: Optional["capo_docdb.types.string.String"] = None,
    restore_to_time: Optional["capo_docdb.types.t_stamp.TStamp"] = None,
    use_latest_restorable_time: Optional["capo_docdb.types.boolean.Boolean"] = None,
    port: Optional["capo_docdb.types.integer_optional.IntegerOptional"] = None,
    db_subnet_group_name: Optional["capo_docdb.types.string.String"] = None,
    vpc_security_group_ids: Optional[
        "capo_docdb.types.vpc_security_group_id_list.VpcSecurityGroupIdList"
    ] = None,
    tags: Optional["capo_docdb.types.tag_list.TagList"] = None,
    kms_key_id: Optional["capo_docdb.types.string.String"] = None,
    enable_cloudwatch_logs_exports: Optional[
        "capo_docdb.types.log_type_list.LogTypeList"
    ] = None,
    deletion_protection: Optional[
        "capo_docdb.types.boolean_optional.BooleanOptional"
    ] = None,
    serverless_v2_scaling_configuration: Optional[
        "capo_docdb.types.serverless_v2_scaling_configuration.ServerlessV2ScalingConfiguration"
    ] = None,
    storage_type: Optional["capo_docdb.types.string.String"] = None,
    network_type: Optional["capo_docdb.types.string.String"] = None,
    copy_tags_to_snapshot: Optional[
        "capo_docdb.types.boolean_optional.BooleanOptional"
    ] = None,
) -> "capo_docdb.types.restore_db_cluster_to_point_in_time_result.RestoreDBClusterToPointInTimeResult":
    """<p>Restores a cluster to an arbitrary point in time. Users can restore to any point in time before <code>LatestRestorableTime</code> for up to <code>BackupRetentionPeriod</code> days. The target cluster is created from the source cluster with the same configuration as the original cluster, except that the new cluster is created with the default security group. </p>

    Args:
        db_cluster_identifier: <p>The name of the new cluster to be created.</p> <p>Constraints:</p> <ul> <li> <p>Must contain from 1 to 63 letters, numbers, or hyphens.</p> </li> <li> <p>The first character must be a letter.</p> </li> <li> <p>Cannot end with a hyphen or contain two consecutive hyphens.</p> </li> </ul>
        restore_type: <p>The type of restore to be performed. You can specify one of the following values:</p> <ul> <li> <p> <code>full-copy</code> - The new DB cluster is restored as a full copy of the source DB cluster.</p> </li> <li> <p> <code>copy-on-write</code> - The new DB cluster is restored as a clone of the source DB cluster.</p> </li> </ul> <p>Constraints: You can't specify <code>copy-on-write</code> if the engine version of the source DB cluster is earlier than 1.11.</p> <p>If you don't specify a <code>RestoreType</code> value, then the new DB cluster is restored as a full copy of the source DB cluster.</p>
        source_db_cluster_identifier: <p>The identifier of the source cluster from which to restore.</p> <p>Constraints:</p> <ul> <li> <p>Must match the identifier of an existing <code>DBCluster</code>.</p> </li> </ul>
        restore_to_time: <p>The date and time to restore the cluster to.</p> <p>Valid values: A time in Universal Coordinated Time (UTC) format.</p> <p>Constraints:</p> <ul> <li> <p>Must be before the latest restorable time for the instance.</p> </li> <li> <p>Must be specified if the <code>UseLatestRestorableTime</code> parameter is not provided.</p> </li> <li> <p>Cannot be specified if the <code>UseLatestRestorableTime</code> parameter is <code>true</code>.</p> </li> <li> <p>Cannot be specified if the <code>RestoreType</code> parameter is <code>copy-on-write</code>.</p> </li> </ul> <p>Example: <code>2015-03-07T23:45:00Z</code> </p>
        use_latest_restorable_time: <p>A value that is set to <code>true</code> to restore the cluster to the latest restorable backup time, and <code>false</code> otherwise. </p> <p>Default: <code>false</code> </p> <p>Constraints: Cannot be specified if the <code>RestoreToTime</code> parameter is provided.</p>
        port: <p>The port number on which the new cluster accepts connections.</p> <p>Constraints: Must be a value from <code>1150</code> to <code>65535</code>. </p> <p>Default: The default port for the engine.</p>
        db_subnet_group_name: <p>The subnet group name to use for the new cluster.</p> <p>Constraints: If provided, must match the name of an existing <code>DBSubnetGroup</code>.</p> <p>Example: <code>mySubnetgroup</code> </p>
        vpc_security_group_ids: <p>A list of VPC security groups that the new cluster belongs to.</p>
        tags: <p>The tags to be assigned to the restored cluster.</p>
        kms_key_id: <p>The KMS key identifier to use when restoring an encrypted cluster from an encrypted cluster.</p> <p>The KMS key identifier is the Amazon Resource Name (ARN) for the KMS encryption key. If you are restoring a cluster with the same Amazon Web Services account that owns the KMS encryption key used to encrypt the new cluster, then you can use the KMS key alias instead of the ARN for the KMS encryption key.</p> <p>You can restore to a new cluster and encrypt the new cluster with an KMS key that is different from the KMS key used to encrypt the source cluster. The new DB cluster is encrypted with the KMS key identified by the <code>KmsKeyId</code> parameter.</p> <p>If you do not specify a value for the <code>KmsKeyId</code> parameter, then the following occurs:</p> <ul> <li> <p>If the cluster is encrypted, then the restored cluster is encrypted using the KMS key that was used to encrypt the source cluster.</p> </li> <li> <p>If the cluster is not encrypted, then the restored cluster is not encrypted.</p> </li> </ul> <p>If <code>DBClusterIdentifier</code> refers to a cluster that is not encrypted, then the restore request is rejected.</p>
        enable_cloudwatch_logs_exports: <p>A list of log types that must be enabled for exporting to Amazon CloudWatch Logs.</p>
        deletion_protection: <p>Specifies whether this cluster can be deleted. If <code>DeletionProtection</code> is enabled, the cluster cannot be deleted unless it is modified and <code>DeletionProtection</code> is disabled. <code>DeletionProtection</code> protects clusters from being accidentally deleted.</p>
        serverless_v2_scaling_configuration: <p>Contains the scaling configuration of an Amazon DocumentDB Serverless cluster.</p>
        storage_type: <p>The storage type to associate with the DB cluster.</p> <p>For information on storage types for Amazon DocumentDB clusters, see Cluster storage configurations in the <i>Amazon DocumentDB Developer Guide</i>.</p> <p>Valid values for storage type - <code>standard | iopt1</code> </p> <p>Default value is <code>standard </code> </p>
        network_type: <p>The network type of the cluster.</p> <p>The network type is determined by the <code>DBSubnetGroup</code> specified for the cluster. A <code>DBSubnetGroup</code> can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (<code>DUAL</code>).</p> <p>For more information, see <a href="https://docs.aws.amazon.com/documentdb/latest/devguide/vpc-clusters.html">DocumentDB clusters in a VPC</a> in the Amazon DocumentDB Developer Guide.</p> <p>Valid Values: <code>IPV4</code> | <code>DUAL</code> </p>
        copy_tags_to_snapshot: <p>Specifies whether to copy all tags from the restored DB cluster to snapshots of the restored DB cluster. The default is not to copy them.</p>

    Raises:
        capo_docdb.errors.db_cluster_already_exists_fault.DBClusterAlreadyExistsFault: <p>You already have a cluster with the given identifier.</p>
        capo_docdb.errors.db_cluster_not_found_fault.DBClusterNotFoundFault: <p> <code>DBClusterIdentifier</code> doesn't refer to an existing cluster. </p>
        capo_docdb.errors.db_cluster_quota_exceeded_fault.DBClusterQuotaExceededFault: <p>The cluster can't be created because you have reached the maximum allowed quota of clusters.</p>
        capo_docdb.errors.db_cluster_snapshot_not_found_fault.DBClusterSnapshotNotFoundFault: <p> <code>DBClusterSnapshotIdentifier</code> doesn't refer to an existing cluster snapshot. </p>
        capo_docdb.errors.db_subnet_group_not_found_fault.DBSubnetGroupNotFoundFault: <p> <code>DBSubnetGroupName</code> doesn't refer to an existing subnet group. </p>
        capo_docdb.errors.insufficient_db_cluster_capacity_fault.InsufficientDBClusterCapacityFault: <p>The cluster doesn't have enough capacity for the current operation.</p>
        capo_docdb.errors.insufficient_storage_cluster_capacity_fault.InsufficientStorageClusterCapacityFault: <p>There is not enough storage available for the current action. You might be able to resolve this error by updating your subnet group to use different Availability Zones that have more storage available. </p>
        capo_docdb.errors.invalid_db_cluster_snapshot_state_fault.InvalidDBClusterSnapshotStateFault: <p>The provided value isn't a valid cluster snapshot state.</p>
        capo_docdb.errors.invalid_db_cluster_state_fault.InvalidDBClusterStateFault: <p>The cluster isn't in a valid state.</p>
        capo_docdb.errors.invalid_db_snapshot_state_fault.InvalidDBSnapshotStateFault: <p>The state of the snapshot doesn't allow deletion.</p>
        capo_docdb.errors.invalid_restore_fault.InvalidRestoreFault: <p>You cannot restore from a virtual private cloud (VPC) backup to a non-VPC DB instance.</p>
        capo_docdb.errors.invalid_subnet.InvalidSubnet: <p>The requested subnet is not valid, or multiple subnets were requested that are not all in a common virtual private cloud (VPC).</p>
        capo_docdb.errors.invalid_vpc_network_state_fault.InvalidVPCNetworkStateFault: <p>The subnet group doesn't cover all Availability Zones after it is created because of changes that were made.</p>
        capo_docdb.errors.kms_key_not_accessible_fault.KMSKeyNotAccessibleFault: <p>An error occurred when accessing an KMS key.</p>
        capo_docdb.errors.network_type_not_supported.NetworkTypeNotSupported: <p>The network type is not supported by either <code>DBSubnetGroup</code> or the DB engine version.</p>
        capo_docdb.errors.storage_quota_exceeded_fault.StorageQuotaExceededFault: <p>The request would cause you to exceed the allowed amount of storage available across all instances.</p>
        capo_docdb.errors.UnknownServiceError: The service returned an error code this client does not model.
    """

    async def _handler(
        req: "AsyncOperationRequest[capo_docdb.types.restore_db_cluster_to_point_in_time_message.RestoreDBClusterToPointInTimeMessage]",
    ) -> AsyncOperationResponse[
        "capo_docdb.types.restore_db_cluster_to_point_in_time_result.RestoreDBClusterToPointInTimeResult"
    ]:
        import capo_docdb._operations.amazon_rd_sv19.restore_db_cluster_to_point_in_time

        (
            output,
            http_response,
        ) = await capo_docdb._operations.amazon_rd_sv19.restore_db_cluster_to_point_in_time.async_restore_db_cluster_to_point_in_time(
            req.options, req.input
        )
        return AsyncOperationResponse(output=output, response=http_response)

    interceptors_, options_ = self.operation_options(
        config_overrides, OperationLogging("RestoreDBClusterToPointInTime")
    )
    input_: capo_docdb.types.restore_db_cluster_to_point_in_time_message.RestoreDBClusterToPointInTimeMessage = {}
    if db_cluster_identifier is not None:
        input_["db_cluster_identifier"] = db_cluster_identifier
    if restore_type is not None:
        input_["restore_type"] = restore_type
    if source_db_cluster_identifier is not None:
        input_["source_db_cluster_identifier"] = source_db_cluster_identifier
    if restore_to_time is not None:
        input_["restore_to_time"] = restore_to_time
    if use_latest_restorable_time is not None:
        input_["use_latest_restorable_time"] = use_latest_restorable_time
    if port is not None:
        input_["port"] = port
    if db_subnet_group_name is not None:
        input_["db_subnet_group_name"] = db_subnet_group_name
    if vpc_security_group_ids is not None:
        input_["vpc_security_group_ids"] = vpc_security_group_ids
    if tags is not None:
        input_["tags"] = tags
    if kms_key_id is not None:
        input_["kms_key_id"] = kms_key_id
    if enable_cloudwatch_logs_exports is not None:
        input_["enable_cloudwatch_logs_exports"] = enable_cloudwatch_logs_exports
    if deletion_protection is not None:
        input_["deletion_protection"] = deletion_protection
    if serverless_v2_scaling_configuration is not None:
        input_["serverless_v2_scaling_configuration"] = (
            serverless_v2_scaling_configuration
        )
    if storage_type is not None:
        input_["storage_type"] = storage_type
    if network_type is not None:
        input_["network_type"] = network_type
    if copy_tags_to_snapshot is not None:
        input_["copy_tags_to_snapshot"] = copy_tags_to_snapshot

    response = await aexecute_pipeline(
        AsyncOperationRequest(input=input_, options=options_),
        handler=_handler,
        interceptors=list(interceptors_),
    )
    await response.response.aclose()
    return response.output