set_subnets async ¶

async def set_subnets(
    self,
    *,
    config_overrides: Optional[AsyncElasticLoadBalancingv2ClientConfig] = None,
    load_balancer_arn: Optional[
        "capo_elastic_load_balancing_v2.types.load_balancer_arn.LoadBalancerArn"
    ] = None,
    subnets: Optional[
        "capo_elastic_load_balancing_v2.types.subnets.Subnets"
    ] = None,
    subnet_mappings: Optional[
        "capo_elastic_load_balancing_v2.types.subnet_mappings.SubnetMappings"
    ] = None,
    ip_address_type: Optional[
        "capo_elastic_load_balancing_v2.types.ip_address_type.IpAddressType"
    ] = None,
    enable_prefix_for_ipv6_source_nat: Optional[
        "capo_elastic_load_balancing_v2.types.enable_prefix_for_ipv6_source_nat_enum.EnablePrefixForIpv6SourceNatEnum"
    ] = None,
) -> "capo_elastic_load_balancing_v2.types.set_subnets_output.SetSubnetsOutput":
    """<p>Enables the Availability Zones for the specified public subnets for the specified Application Load Balancer, Network Load Balancer or Gateway Load Balancer. The specified subnets replace the previously enabled subnets.</p>

    Args:
        load_balancer_arn: <p>The Amazon Resource Name (ARN) of the load balancer.</p>
        subnets: <p>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.</p> <p>[Application Load Balancers] You must specify subnets from at least two Availability Zones.</p> <p>[Application Load Balancers on Outposts] You must specify one Outpost subnet.</p> <p>[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.</p> <p>[Network Load Balancers] You can specify subnets from one or more Availability Zones.</p> <p>[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You must include all subnets that were enabled previously, with their existing configurations, plus any additional subnets.</p>
        subnet_mappings: <p>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You must specify either subnets or subnet mappings.</p> <p>[Application Load Balancers] You must specify subnets from at least two Availability Zones. You can't specify Elastic IP addresses for your subnets.</p> <p>[Application Load Balancers on Outposts] You must specify one Outpost subnet.</p> <p>[Application Load Balancers on Local Zones] You can specify subnets from one or more Local Zones.</p> <p>[Network Load Balancers] You can specify subnets from one or more Availability Zones. You can specify one Elastic IP address per subnet if you need static IP addresses for your internet-facing load balancer. For internal load balancers, you can specify one private IP address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you can specify one IPv6 address per subnet.</p> <p>[Gateway Load Balancers] You can specify subnets from one or more Availability Zones.</p>
        ip_address_type: <p>The IP address type.</p> <p>[Application Load Balancers] The possible values are <code>ipv4</code> (IPv4 addresses), <code>dualstack</code> (IPv4 and IPv6 addresses), and <code>dualstack-without-public-ipv4</code> (public IPv6 addresses and private IPv4 and IPv6 addresses).</p> <p>[Network Load Balancers and Gateway Load Balancers] The possible values are <code>ipv4</code> (IPv4 addresses) and <code>dualstack</code> (IPv4 and IPv6 addresses).</p>
        enable_prefix_for_ipv6_source_nat: <p>[Network Load Balancers with UDP listeners] Indicates whether to use an IPv6 prefix from each subnet for source NAT. The IP address type must be <code>dualstack</code>. The default value is <code>off</code>.</p>

    Raises:
        capo_elastic_load_balancing_v2.errors.allocation_id_not_found_exception.AllocationIdNotFoundException: <p>The specified allocation ID does not exist.</p>
        capo_elastic_load_balancing_v2.errors.availability_zone_not_supported_exception.AvailabilityZoneNotSupportedException: <p>The specified Availability Zone is not supported.</p>
        capo_elastic_load_balancing_v2.errors.capacity_reservation_pending_exception.CapacityReservationPendingException: <p>There is a pending capacity reservation.</p>
        capo_elastic_load_balancing_v2.errors.invalid_configuration_request_exception.InvalidConfigurationRequestException: <p>The requested configuration is not valid.</p>
        capo_elastic_load_balancing_v2.errors.invalid_subnet_exception.InvalidSubnetException: <p>The specified subnet is out of available addresses.</p>
        capo_elastic_load_balancing_v2.errors.load_balancer_not_found_exception.LoadBalancerNotFoundException: <p>The specified load balancer does not exist.</p>
        capo_elastic_load_balancing_v2.errors.subnet_not_found_exception.SubnetNotFoundException: <p>The specified subnet does not exist.</p>
        capo_elastic_load_balancing_v2.errors.UnknownServiceError: The service returned an error code this client does not model.

    Examples:
        To enable Availability Zones for a load balancer
        This example enables the Availability Zones for the specified subnets for the specified load balancer.

        >>> await client.set_subnets(load_balancer_arn='arn:aws:elasticloadbalancing:us-west-2:123456789012:loadbalancer/app/my-load-balancer/50dc6c495c0c9188', subnets=['subnet-8360a9e7', 'subnet-b7d581c0'])
    """

    async def _handler(
        req: "AsyncOperationRequest[capo_elastic_load_balancing_v2.types.set_subnets_input.SetSubnetsInput]",
    ) -> AsyncOperationResponse[
        "capo_elastic_load_balancing_v2.types.set_subnets_output.SetSubnetsOutput"
    ]:
        import capo_elastic_load_balancing_v2._operations.elastic_load_balancing_v10.set_subnets

        (
            output,
            http_response,
        ) = await capo_elastic_load_balancing_v2._operations.elastic_load_balancing_v10.set_subnets.async_set_subnets(
            req.options, req.input
        )
        return AsyncOperationResponse(output=output, response=http_response)

    interceptors_, options_ = self.operation_options(
        config_overrides, OperationLogging("SetSubnets")
    )
    input_: capo_elastic_load_balancing_v2.types.set_subnets_input.SetSubnetsInput = {}
    if load_balancer_arn is not None:
        input_["load_balancer_arn"] = load_balancer_arn
    if subnets is not None:
        input_["subnets"] = subnets
    if subnet_mappings is not None:
        input_["subnet_mappings"] = subnet_mappings
    if ip_address_type is not None:
        input_["ip_address_type"] = ip_address_type
    if enable_prefix_for_ipv6_source_nat is not None:
        input_["enable_prefix_for_ipv6_source_nat"] = (
            enable_prefix_for_ipv6_source_nat
        )

    response = await aexecute_pipeline(
        AsyncOperationRequest(input=input_, options=options_),
        handler=_handler,
        interceptors=list(interceptors_),
    )
    await response.response.aclose()
    return response.output