send_email async ¶

async def send_email(
    self,
    source: "capo_ses.types.address.Address",
    destination: "capo_ses.types.destination.Destination",
    message: "capo_ses.types.message.Message",
    *,
    config_overrides: Optional[AsyncSESClientConfig] = None,
    reply_to_addresses: Optional["capo_ses.types.address_list.AddressList"] = None,
    return_path: Optional["capo_ses.types.address.Address"] = None,
    source_arn: Optional[
        "capo_ses.types.amazon_resource_name.AmazonResourceName"
    ] = None,
    return_path_arn: Optional[
        "capo_ses.types.amazon_resource_name.AmazonResourceName"
    ] = None,
    tags: Optional["capo_ses.types.message_tag_list.MessageTagList"] = None,
    configuration_set_name: Optional[
        "capo_ses.types.configuration_set_name.ConfigurationSetName"
    ] = None,
) -> "capo_ses.types.send_email_response.SendEmailResponse":
    """<p>Composes an email message and immediately queues it for sending. To send email using this operation, your message must meet the following requirements:</p> <ul> <li> <p>The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation results in an "Email address not verified" error. </p> </li> <li> <p>If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see <a href="https://docs.aws.amazon.com/ses/latest/dg/verify-addresses-and-domains.html">Verifying Email Addresses and Domains</a> in the <i>Amazon SES Developer Guide.</i> </p> </li> <li> <p>The maximum message size is 10 MB.</p> </li> <li> <p>The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format <i>UserName@[SubDomain.]Domain.TopLevelDomain</i>), the entire message is rejected, even if the message contains other recipients that are valid.</p> </li> <li> <p>The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the <code>SendEmail</code> operation several times to send the message to each group.</p> </li> </ul> <important> <p>For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your <i>sending quota</i>). For more information about sending quotas in Amazon SES, see <a href="https://docs.aws.amazon.com/ses/latest/dg/manage-sending-quotas.html">Managing Your Amazon SES Sending Limits</a> in the <i>Amazon SES Developer Guide.</i> </p> </important>

    Args:
        source: <p>The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the <a href="https://docs.aws.amazon.com/ses/latest/dg/creating-identities.html">Amazon SES Developer Guide</a>.</p> <p>If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the <code>SourceArn</code> parameter. For more information about sending authorization, see the <a href="https://docs.aws.amazon.com/ses/latest/dg/sending-authorization.html">Amazon SES Developer Guide</a>.</p> <note> <p>Amazon SES does not support the SMTPUTF8 extension, as described in <a href="https://tools.ietf.org/html/rfc6531">RFC6531</a>. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in <a href="https://docs.aws.amazon.com/ses/latest/dg/send-email-raw.html">Sending raw email using the Amazon SES API</a>. For more information about Punycode, see <a href="http://tools.ietf.org/html/rfc3492">RFC 3492</a>.</p> </note>
        destination: <p>The destination for this email, composed of To:, CC:, and BCC: fields.</p>
        message: <p>The message to be sent.</p>
        reply_to_addresses: <p>The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address receives the reply.</p>
        return_path: <p>The email address that bounces and complaints are forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message is returned from the recipient's ISP; this message is forwarded to the email address specified by the <code>ReturnPath</code> parameter. The <code>ReturnPath</code> parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. </p>
        source_arn: <p>This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the <code>Source</code> parameter.</p> <p>For example, if the owner of <code>example.com</code> (which has ARN <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you to send from <code>[email protected]</code>, then you would specify the <code>SourceArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>Source</code> to be <code>[email protected]</code>.</p> <p>For more information about sending authorization, see the <a href="https://docs.aws.amazon.com/ses/latest/dg/sending-authorization.html">Amazon SES Developer Guide</a>.</p>
        return_path_arn: <p>This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the <code>ReturnPath</code> parameter.</p> <p>For example, if the owner of <code>example.com</code> (which has ARN <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>) attaches a policy to it that authorizes you to use <code>[email protected]</code>, then you would specify the <code>ReturnPathArn</code> to be <code>arn:aws:ses:us-east-1:123456789012:identity/example.com</code>, and the <code>ReturnPath</code> to be <code>[email protected]</code>.</p> <p>For more information about sending authorization, see the <a href="https://docs.aws.amazon.com/ses/latest/dg/sending-authorization.html">Amazon SES Developer Guide</a>.</p>
        tags: <p>A list of tags, in the form of name/value pairs, to apply to an email that you send using <code>SendEmail</code>. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.</p>
        configuration_set_name: <p>The name of the configuration set to use when you send an email using <code>SendEmail</code>.</p>

    Raises:
        capo_ses.errors.account_sending_paused_exception.AccountSendingPausedException: <p>Indicates that email sending is disabled for your entire Amazon SES account.</p> <p>You can enable or disable email sending for your Amazon SES account using <a>UpdateAccountSendingEnabled</a>.</p>
        capo_ses.errors.configuration_set_does_not_exist_exception.ConfigurationSetDoesNotExistException: <p>Indicates that the configuration set does not exist.</p>
        capo_ses.errors.configuration_set_sending_paused_exception.ConfigurationSetSendingPausedException: <p>Indicates that email sending is disabled for the configuration set.</p> <p>You can enable or disable email sending for a configuration set using <a>UpdateConfigurationSetSendingEnabled</a>.</p>
        capo_ses.errors.mail_from_domain_not_verified_exception.MailFromDomainNotVerifiedException: <p> Indicates that the message could not be sent because Amazon SES could not read the MX record required to use the specified MAIL FROM domain. For information about editing the custom MAIL FROM domain settings for an identity, see the <a href="https://docs.aws.amazon.com/ses/latest/DeveloperGuide/mail-from-edit.html">Amazon SES Developer Guide</a>.</p>
        capo_ses.errors.message_rejected.MessageRejected: <p>Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error.</p>
        capo_ses.errors.UnknownServiceError: The service returned an error code this client does not model.

    Examples:
        SendEmail
        The following example sends a formatted email:

        >>> await client.send_email(source='[email protected]', destination={'ToAddresses': ['[email protected]', '[email protected]'], 'CcAddresses': ['[email protected]'], 'BccAddresses': []}, message={'Subject': {'Data': 'Test email', 'Charset': 'UTF-8'}, 'Body': {'Text': {'Data': 'This is the message body in text format.', 'Charset': 'UTF-8'}, 'Html': {'Data': 'This message body contains HTML formatting. It can, for example, contain links like this one: <a class="ulink" href="http://docs.aws.amazon.com/ses/latest/DeveloperGuide" target="_blank">Amazon SES Developer Guide</a>.', 'Charset': 'UTF-8'}}}, reply_to_addresses=[], return_path='', source_arn='', return_path_arn='')
    """

    async def _handler(
        req: "AsyncOperationRequest[capo_ses.types.send_email_request.SendEmailRequest]",
    ) -> AsyncOperationResponse[
        "capo_ses.types.send_email_response.SendEmailResponse"
    ]:
        import capo_ses._operations.simple_email_service.send_email

        (
            output,
            http_response,
        ) = await capo_ses._operations.simple_email_service.send_email.async_send_email(
            req.options, req.input
        )
        return AsyncOperationResponse(output=output, response=http_response)

    interceptors_, options_ = self.operation_options(
        config_overrides, OperationLogging("SendEmail")
    )
    input_: capo_ses.types.send_email_request.SendEmailRequest = {
        "source": source,
        "destination": destination,
        "message": message,
    }
    if reply_to_addresses is not None:
        input_["reply_to_addresses"] = reply_to_addresses
    if return_path is not None:
        input_["return_path"] = return_path
    if source_arn is not None:
        input_["source_arn"] = source_arn
    if return_path_arn is not None:
        input_["return_path_arn"] = return_path_arn
    if tags is not None:
        input_["tags"] = tags
    if configuration_set_name is not None:
        input_["configuration_set_name"] = configuration_set_name

    response = await aexecute_pipeline(
        AsyncOperationRequest(input=input_, options=options_),
        handler=_handler,
        interceptors=list(interceptors_),
    )
    await response.response.aclose()
    return response.output