update_association async ¶

async def update_association(
    self,
    association_id: "capo_ssm.types.association_id.AssociationId",
    *,
    config_overrides: Optional[AsyncSSMClientConfig] = None,
    parameters: Optional["capo_ssm.types.parameters.Parameters"] = None,
    document_version: Optional[
        "capo_ssm.types.document_version.DocumentVersion"
    ] = None,
    schedule_expression: Optional[
        "capo_ssm.types.schedule_expression.ScheduleExpression"
    ] = None,
    output_location: Optional[
        "capo_ssm.types.instance_association_output_location.InstanceAssociationOutputLocation"
    ] = None,
    name: Optional["capo_ssm.types.document_arn.DocumentARN"] = None,
    targets: Optional["capo_ssm.types.targets.Targets"] = None,
    association_name: Optional[
        "capo_ssm.types.association_name.AssociationName"
    ] = None,
    association_version: Optional[
        "capo_ssm.types.association_version.AssociationVersion"
    ] = None,
    automation_target_parameter_name: Optional[
        "capo_ssm.types.automation_target_parameter_name.AutomationTargetParameterName"
    ] = None,
    max_errors: Optional["capo_ssm.types.max_errors.MaxErrors"] = None,
    max_concurrency: Optional[
        "capo_ssm.types.max_concurrency.MaxConcurrency"
    ] = None,
    compliance_severity: Optional[
        "capo_ssm.types.association_compliance_severity.AssociationComplianceSeverity"
    ] = None,
    sync_compliance: Optional[
        "capo_ssm.types.association_sync_compliance.AssociationSyncCompliance"
    ] = None,
    apply_only_at_cron_interval: Optional[
        "capo_ssm.types.apply_only_at_cron_interval.ApplyOnlyAtCronInterval"
    ] = None,
    calendar_names: Optional[
        "capo_ssm.types.calendar_name_or_arn_list.CalendarNameOrARNList"
    ] = None,
    target_locations: Optional[
        "capo_ssm.types.target_locations.TargetLocations"
    ] = None,
    schedule_offset: Optional[
        "capo_ssm.types.schedule_offset.ScheduleOffset"
    ] = None,
    duration: Optional["capo_ssm.types.duration.Duration"] = None,
    target_maps: Optional["capo_ssm.types.target_maps.TargetMaps"] = None,
    alarm_configuration: Optional[
        "capo_ssm.types.alarm_configuration.AlarmConfiguration"
    ] = None,
    association_dispatch_assume_role: Optional[
        "capo_ssm.types.association_dispatch_assume_role_arn.AssociationDispatchAssumeRoleArn"
    ] = None,
) -> "capo_ssm.types.update_association_result.UpdateAssociationResult":
    """<p>Updates an association. You can update the association name and version, the document version, schedule, parameters, and Amazon Simple Storage Service (Amazon S3) output. When you call <code>UpdateAssociation</code>, the system removes all optional parameters from the request and overwrites the association with null values for those parameters. This is by design. You must specify all optional parameters in the call, even if you are not changing the parameters. This includes the <code>Name</code> parameter. Before calling this API action, we recommend that you call the <a>DescribeAssociation</a> API operation and make a note of all optional parameters required for your <code>UpdateAssociation</code> call.</p> <p>In order to call this API operation, a user, group, or role must be granted permission to call the <a>DescribeAssociation</a> API operation. If you don't have permission to call <code>DescribeAssociation</code>, then you receive the following error: <code>An error occurred (AccessDeniedException) when calling the UpdateAssociation operation: User: <user_arn> isn't authorized to perform: ssm:DescribeAssociation on resource: <resource_arn></code> </p> <important> <p>When you update an association, the association immediately runs against the specified targets. You can add the <code>ApplyOnlyAtCronInterval</code> parameter to run the association during the next schedule run.</p> </important>

    Args:
        association_id: <p>The ID of the association you want to update. </p>
        parameters: <p>The parameters you want to update for the association. If you create a parameter using Parameter Store, a tool in Amazon Web Services Systems Manager, you can reference the parameter using <code>{{ssm:parameter-name}}</code>.</p>
        document_version: <p>The document version you want update for the association. </p> <important> <p>State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the <code>default</code> version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version to <code>default</code>.</p> </important>
        schedule_expression: <p>The cron expression used to schedule the association that you want to update.</p>
        output_location: <p>An S3 bucket where you want to store the results of this request.</p>
        name: <p>The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.</p> <p>You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another account.</p> <p>For Systems Manager document (SSM document) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:</p> <p> <code>arn:aws:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i> </code> </p> <p>For example:</p> <p> <code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code> </p> <p>For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code> or <code>My-Document</code>.</p>
        targets: <p>The targets of the association.</p>
        association_name: <p>The name of the association that you want to update.</p>
        association_version: <p>This parameter is provided for concurrency control purposes. You must specify the latest association version in the service. If you want to ensure that this request succeeds, either specify <code>$LATEST</code>, or omit this parameter.</p>
        automation_target_parameter_name: <p>Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a tool in Amazon Web Services Systems Manager.</p>
        max_errors: <p>The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set <code>MaxError</code> to 10%, then the system stops sending the request when the sixth error is received.</p> <p>Executions that are already running an association when <code>MaxErrors</code> is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set <code>MaxConcurrency</code> to 1 so that executions proceed one at a time.</p>
        max_concurrency: <p>The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.</p> <p>If a new managed node starts and attempts to run an association while Systems Manager is running <code>MaxConcurrency</code> associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for <code>MaxConcurrency</code>.</p>
        compliance_severity: <p>The severity level to assign to the association.</p>
        sync_compliance: <p>The mode for generating association compliance. You can specify <code>AUTO</code> or <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is <code>COMPLIANT</code>. If the association execution doesn't run successfully, the association is <code>NON-COMPLIANT</code>.</p> <p>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a parameter for the <a>PutComplianceItems</a> API operation. In this case, compliance data isn't managed by State Manager, a tool in Amazon Web Services Systems Manager. It is managed by your direct call to the <a>PutComplianceItems</a> API operation.</p> <p>By default, all associations use <code>AUTO</code> mode.</p>
        apply_only_at_cron_interval: <p>By default, when you update an association, the system runs it immediately after it is updated and then according to the schedule you specified. Specify <code>true</code> for <code>ApplyOnlyAtCronInterval</code> if you want the association to run only according to the schedule you specified.</p> <p>If you chose this option when you created an association and later you edit that association or you make changes to the Automation runbook or SSM document on which that association is based, State Manager applies the association at the next specified cron interval. For example, if you chose the <code>Latest</code> version of an SSM document when you created an association and you edit the association by choosing a different document version on the Documents page, State Manager applies the association at the next specified cron interval if you previously set <code>ApplyOnlyAtCronInterval</code> to <code>true</code>. If this option wasn't selected, State Manager immediately runs the association.</p> <p>For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#state-manager-about-scheduling">Understanding when associations are applied to resources</a> and <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#runbook-target-updates">About target updates with Automation runbooks</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p> <p>This parameter isn't supported for rate expressions.</p> <p>You can reset this parameter. To do so, specify the <code>no-apply-only-at-cron-interval</code> parameter when you update the association from the command line. This parameter forces the association to run immediately after updating it and according to the interval specified.</p>
        calendar_names: <p>The names or Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar">Amazon Web Services Systems Manager Change Calendar</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
        target_locations: <p>A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to update an association in multiple Regions and multiple accounts.</p> <note> <p>The <code>TargetLocationAlarmConfiguration</code> parameter is not supported by State Manager.</p> </note>
        schedule_offset: <p>Number of days to wait after the scheduled day to run an association. For example, if you specified a cron schedule of <code>cron(0 0 ? * THU#2 *)</code>, you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html">Reference: Cron and rate expressions for Systems Manager</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. </p> <note> <p>To use offsets, you must specify the <code>ApplyOnlyAtCronInterval</code> parameter. This option tells the system not to run an association immediately after you create it. </p> </note>
        duration: <p>The number of hours the association can run before it is canceled. Duration applies to associations that are currently running, and any pending and in progress commands on all targets. If a target was taken offline for the association to run, it is made available again immediately, without a reboot. </p> <p>The <code>Duration</code> parameter applies only when both these conditions are true:</p> <ul> <li> <p>The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution. </p> </li> <li> <p>The command specifies the <code> <a href="https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_UpdateAssociation.html#systemsmanager-UpdateAssociation-request-ApplyOnlyAtCronInterval">ApplyOnlyAtCronInterval</a> </code> parameter, which means that the association doesn't run immediately after it is updated, but only according to the specified schedule.</p> </li> </ul>
        target_maps: <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.</p>
        association_dispatch_assume_role: <p>A role used by association to take actions on your behalf. State Manager will assume this role and call required APIs when dispatching configurations to nodes. If not specified, <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/using-service-linked-roles.html"> service-linked role for Systems Manager</a> will be used by default. </p> <note> <p>It is recommended that you define a custom IAM role so that you have full control of the permissions that State Manager has when taking actions on your behalf.</p> <p>Service-linked role support in State Manager is being phased out. Associations relying on service-linked role may require updates in the future to continue functioning properly.</p> </note>

    Raises:
        capo_ssm.errors.association_does_not_exist.AssociationDoesNotExist: <p>The specified association doesn't exist.</p>
        capo_ssm.errors.association_version_limit_exceeded.AssociationVersionLimitExceeded: <p>You have reached the maximum number versions allowed for an association. Each association has a limit of 1,000 versions. </p>
        capo_ssm.errors.internal_server_error.InternalServerError: <p>An error occurred on the server side.</p>
        capo_ssm.errors.invalid_association_version.InvalidAssociationVersion: <p>The version you specified isn't valid. Use ListAssociationVersions to view all versions of an association according to the association ID. Or, use the <code>$LATEST</code> parameter to view the latest version of the association.</p>
        capo_ssm.errors.invalid_document.InvalidDocument: <p>The specified SSM document doesn't exist.</p>
        capo_ssm.errors.invalid_document_version.InvalidDocumentVersion: <p>The document version isn't valid or doesn't exist.</p>
        capo_ssm.errors.invalid_output_location.InvalidOutputLocation: <p>The output location isn't valid or doesn't exist.</p>
        capo_ssm.errors.invalid_parameters.InvalidParameters: <p>You must specify values for all required parameters in the Amazon Web Services Systems Manager document (SSM document). You can only supply values to parameters defined in the SSM document.</p>
        capo_ssm.errors.invalid_schedule.InvalidSchedule: <p>The schedule is invalid. Verify your cron or rate expression and try again.</p>
        capo_ssm.errors.invalid_target.InvalidTarget: <p>The target isn't valid or doesn't exist. It might not be configured for Systems Manager or you might not have permission to perform the operation.</p>
        capo_ssm.errors.invalid_target_maps.InvalidTargetMaps: <p>TargetMap parameter isn't valid.</p>
        capo_ssm.errors.invalid_update.InvalidUpdate: <p>The update isn't valid.</p>
        capo_ssm.errors.too_many_updates.TooManyUpdates: <p>There are concurrent updates for a resource that supports one update at a time.</p>
        capo_ssm.errors.UnknownServiceError: The service returned an error code this client does not model.
    """

    async def _handler(
        req: "AsyncOperationRequest[capo_ssm.types.update_association_request.UpdateAssociationRequest]",
    ) -> AsyncOperationResponse[
        "capo_ssm.types.update_association_result.UpdateAssociationResult"
    ]:
        import capo_ssm._operations.amazon_ssm.update_association

        (
            output,
            http_response,
        ) = await capo_ssm._operations.amazon_ssm.update_association.async_update_association(
            req.options, req.input
        )
        return AsyncOperationResponse(output=output, response=http_response)

    def _redact_input(
        input_: "capo_ssm.types.update_association_request.UpdateAssociationRequest",
    ) -> dict[str, Any]:
        import capo_ssm.types.update_association_request

        return capo_ssm.types.update_association_request.redact_sensitive(input_)

    def _redact_output(
        output: "capo_ssm.types.update_association_result.UpdateAssociationResult",
    ) -> dict[str, Any]:
        import capo_ssm.types.update_association_result

        return capo_ssm.types.update_association_result.redact_sensitive(output)

    interceptors_, options_ = self.operation_options(
        config_overrides,
        OperationLogging(
            "UpdateAssociation",
            redact_input=_redact_input,
            redact_output=_redact_output,
        ),
    )
    input_: capo_ssm.types.update_association_request.UpdateAssociationRequest = {
        "association_id": association_id
    }
    if parameters is not None:
        input_["parameters"] = parameters
    if document_version is not None:
        input_["document_version"] = document_version
    if schedule_expression is not None:
        input_["schedule_expression"] = schedule_expression
    if output_location is not None:
        input_["output_location"] = output_location
    if name is not None:
        input_["name"] = name
    if targets is not None:
        input_["targets"] = targets
    if association_name is not None:
        input_["association_name"] = association_name
    if association_version is not None:
        input_["association_version"] = association_version
    if automation_target_parameter_name is not None:
        input_["automation_target_parameter_name"] = (
            automation_target_parameter_name
        )
    if max_errors is not None:
        input_["max_errors"] = max_errors
    if max_concurrency is not None:
        input_["max_concurrency"] = max_concurrency
    if compliance_severity is not None:
        input_["compliance_severity"] = compliance_severity
    if sync_compliance is not None:
        input_["sync_compliance"] = sync_compliance
    if apply_only_at_cron_interval is not None:
        input_["apply_only_at_cron_interval"] = apply_only_at_cron_interval
    if calendar_names is not None:
        input_["calendar_names"] = calendar_names
    if target_locations is not None:
        input_["target_locations"] = target_locations
    if schedule_offset is not None:
        input_["schedule_offset"] = schedule_offset
    if duration is not None:
        input_["duration"] = duration
    if target_maps is not None:
        input_["target_maps"] = target_maps
    if alarm_configuration is not None:
        input_["alarm_configuration"] = alarm_configuration
    if association_dispatch_assume_role is not None:
        input_["association_dispatch_assume_role"] = (
            association_dispatch_assume_role
        )

    response = await aexecute_pipeline(
        AsyncOperationRequest(input=input_, options=options_),
        handler=_handler,
        interceptors=list(interceptors_),
    )
    await response.response.aclose()
    return response.output